The Electric Bicycle Kit includes everything needed (except battery)
You’ll be out cruising along at 34mph / 55km/h without a sweat!
* CE, EN15194 approved
* 48V 1500W and 750W super power brushless gearless hub motor
* Restricted to 750W and 38km/h by default as a road-legal kit
* Nylon tire & alloy rim & stainless steel spoke
* Rare-earth metal magnet are used in the motor to efficiently produce large power
* Aluminum alloy powerful controller guarantee big current supply
* Twist throttle has battery level display and power-cut off button
* Brake Levers cut off the power supply to the motor safely
* Crank speed sensor for pedal assist
Upgraded Intelligent Motor Controller:
* Allow you to swap two power modes between the full 1500W power or 750W power by a single blue switch wire is embedded in controller.
1. Battery and charger are not included in package.
2. The system requires a 48 Volt electrokinetic cell battery with a nominal capacity not less than 14.5Ah.
3. The US regulations dictate that a kit must not exceed the rated power of 750W to be road-legal.
Wheel type: Rear
Motor: Brushless gearless
Rim: Alloy double wall
Spokes: Steel, 12G x 2.6mm
Wheel Size: 26 inch
Wheel Axle: Length 210mm x Dia 10mm
Max load capacity: 551 lb / 250kg
Net weight: 22lb / 10kg
Power Cord Length: 138cm
Mode 1 Power: 750W / 48V; Torque: 45 N.M; Max speed: 24mph / 38 km/h
Mode 2 Power: 1500W / 48V; Torque: 48 N.M; Max speed: 34mph / 55 km/h
1x Brushless Gearless Motor Rear Wheel
1x Intelligent Motor Controller
1x Cable Ties & Plastic Coil
1x Wire Hub
1x Pair of Handle Bars (included Twist Throttle)
1x Pair of Brake Handles
1x yellow junction box
48V 1500W Powerful brushless gearless motor with 34mph (55km/h) speed; Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit.
Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 551LB / 250KG Max Load Capacity.
Brake Levers cut off the power supply to the motor safely; Twist throttle has battery level display
Comes with all the components you need to a full conversion, including Rear Wheel(of 7 speed sprocket), Motor Controller, Cable Ties & Plastic Coil, Wire Hub, Twist Throttle, One Pair of Brake Handles, Manual. (Note: Battery not included)
CE, EN15194 approved; 48 Volt electrokinetic cell battery with a nominal capacity not less than 14.5Ah is required.